# Holding your approach plates **URL:** \ **Category:** Guest Discussion\ **Created:** [August 11, 2001, 7:45pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777 "2001-08-11T19:45:40Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 11, 2001, 7:45pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/1 "2001-08-11T19:45:40Z")
I am currently flying with a student who owns a cirrus and I was wondering if there are any ideas out there a yoke clip or some other setup to hold on to the approach plates…any help here would be very much appreciated! ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 11, 2001, 7:49pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/2 "2001-08-11T19:49:24Z")
I put mine in a clip board in my lap. > I am currently flying with a student who owns a cirrus and I was wondering if there are any ideas out there a yoke clip or some other setup to hold on to the approach plates…any help here would be very much appreciated! > ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 11, 2001, 8:10pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/3 "2001-08-11T20:10:37Z")
I recently got my instrument rating in my SR20. I used a small clip board that strapped to my leg. For me the lap board worked fine; however, I would think that it would be easy to mount some sort of clip on all of that space right below the master switch and panel light switches. ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 11, 2001, 8:29pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/4 "2001-08-11T20:29:34Z")
> I am currently flying with a student who owns a cirrus and I was wondering if there are any ideas out there a yoke clip or some other setup to hold on to the approach plates…any help here would be very much appreciated! Now might be the time to consider using the bound book in your lap. A large paper clip will keep it open to the correct page, and all of the plates are together and stay organized. ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 11, 2001, 9:05pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/5 "2001-08-11T21:05:07Z")
> I am currently flying with a student who owns a cirrus and I was wondering if there are any ideas out there a yoke clip or some other setup to hold on to the approach plates…any help here would be very much appreciated! > Solution exists. Go to the main [SR20.org](http://SR20.org) page, click on “Pix” and then click on the picture labeled “Interior.” You’ll see the infamous EBPC Jepp Plate Holder created by Ed Boland. Gordon ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 11, 2001, 9:42pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/6 "2001-08-11T21:42:52Z")
I passed my instrument check ride yesterday. I use the approach plates that are available on the AOPA web site and print out the individual approaches that are needed. Not only are they alot easier to read but the single pages are a great on a clip board. Stuatr > I am currently flying with a student who owns a cirrus and I was wondering if there are any ideas out there a yoke clip or some other setup to hold on to the approach plates…any help here would be very much appreciated! > ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 14, 2001, 11:47pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/7 "2001-08-14T23:47:10Z")
> Now might be the time to consider using the bound book in your lap. A large paper clip will keep it open to the correct page, and all of the plates are together and stay organized. > The latest _Sporty’s_ lists a very nice clear plastic device for holding standard NOS bound books open to the right approach plate. It straps to the leg with a wide Velcro strap. - Mike. ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 12, 2001, 9:27pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/8 "2001-08-12T21:27:57Z")
> > > > Solution exists. Go to the main [SR20.org](http://SR20.org) page, click on “Pix” and then click on the picture labeled “Interior.” You’ll see the infamous EBPC Jepp Plate Holder created by Ed Boland. > > Gordon I have seen the picture several times, but how exactly is the “infamous EBPC Jepp Plate Holder” attached? Velcro? Thanks . ---
**Author:** ![UnknownPreviousUser](https://sea1.discourse-cdn.com/copa/user_avatar/forum.cirruspilots.org/unknownprevioususer/32/89805_2.png) [@UnknownPreviousUser](https://forum.cirruspilots.org/u/UnknownPreviousUser)\ **Post date:** [August 12, 2001, 11:02pm UTC](https://forum.cirruspilots.org/t/holding-your-approach-plates/38777/9 "2001-08-12T23:02:45Z")
> I have seen the picture several times, but how exactly is the “infamous EBPC Jepp Plate Holder” attached? Velcro? Thanks . It’s apparently secured by the existing screw at the end of the switch panel.